You are trying to plug in your speakers you have 3 leads black yellow and green what goes where please help?

1. What are the 3 wires on a speaker?
2. What are the speaker wire colors for?
3. What are the 3 wires in a aux cord?
4. What does yellow wire connect to?
5. Is yellow speaker wire positive or negative?
6. Which speaker wire is positive?
7. Which speaker cable is positive?
8. Which speaker connection is positive?
9. How do you hook up old speakers?

What are the 3 wires on a speaker?

If we were to dissect the Aux Cable, there would be three wires - a ground cable (usually black or a shielded wire), a right signal cable (usually red) and a left signal cable (usually white or yellow).

What are the speaker wire colors for?

The color code for four-conductor wire is speaker one: Red (positive), Black (negative) speaker two: White (positive), Green (negative). Its purpose is to carry an electrical signal (voltage and current) from the amplifier (or the amplifier section of a receiver) to the speakers.

What are the 3 wires in a aux cord?

AUX cable or auxiliary cable has 3 wires. The Audio left(white/red) , Audio Right(white/red) , ground(black) . The 4 wire aux cables have another wire for microphone. Those 4 wire aux have TRRS male 3.5mm,i.e.,4 terminals.

What does yellow wire connect to?

Yellow wires are used as switch legs to ceiling fans, structural lights, and outlets paired with light switches, while blue wires are usually used as travelers for three-or-four-way switches.

Is yellow speaker wire positive or negative?

The color codes for the four-conductor wire for speaker one are Red (positive), Black (negative), and White or Yellow (positive), Green (negative).

Which speaker wire is positive?

The silver wire is typically going to be the positive speaker wire, and the copper wire is the negative.

Which speaker cable is positive?

Colour-coding: Speaker wires are often colour-coded, which will help you remember which one is positive and which one is negative. The most common colour coding is red and black, where red is positive and black is negative.

Which speaker connection is positive?

Generally speaking, the positive terminal is usually on the left when the speaker is facing up.

How do you hook up old speakers?

For added convenience, use banana plugs instead of bare wire for the speaker connections. Rotate the knurled banana plug knob counterclockwise to open the hole on the banana plug. Insert the bare wire into the hole, then rotate the plug's knob back down. Insert the plug into the end of the binding post on the receiver.