Examples of third generation of computers?

Examples of the third generation computers include IBM-360 series, Honeywell-6000 series, PDP (Personal Data Processor), and IBM-370/168.

1. Which computer is 3rd generation computer?
2. What is the name for 3rd generation?
3. What is the 1st 2nd 3rd 4th generation processor?
4. What are the examples of fourth generation computers?
5. Which IC used in 3rd generation computers?
6. What is the difference between 2nd and 3rd generation computer?
7. What is sixth generation computer?
8. How many transistors are used in third generation microprocessor?
9. What was the main feature of 3rd generation?
10. Which is better i3 3rd Gen or i5 2nd gen?
11. What is the difference between 2nd generation and 3rd generation i5 processor?
12. Who invented 5th generation computer?
13. What is the third and fourth generation of computer?

Which computer is 3rd generation computer?

The computers of third generation used Integrated Circuits (ICs) in place of transistors. A single IC has many transistors, resistors, and capacitors along with the associated circuitry. The IC was invented by Jack Kilby. This development made computers smaller in size, reliable, and efficient.

What is the name for 3rd generation?

Common nicknames for the third generation include Trip, Tripp, Trey, Tres, Trace and Tre. While nicknames for the fourth generation are less common, they include Ivy and Dru, and a fifth generation nickname can be Quinn or, again, Chip.

What is the 1st 2nd 3rd 4th generation processor?

What is 1st / 2nd / 3rd / 4th generation processor? The processor made of PMOS / NMOS / HMOS / HCMOS technology is called 1st / 2nd / 3rd / 4th generation processor, and it is made up of 4 / 8 / 16 / 32 bits.

What are the examples of fourth generation computers?

Some other examples of fourth generation computers are included: IBM 4341, DEC 10, STAR 1000 and PUP 11.

Which IC used in 3rd generation computers?

SSI and MSI IC was used in third generation of computers. SSI, MSI, The first integrated circuits contained only a few transistors and so were called “Small-Scale Integration (SSI).

What is the difference between 2nd and 3rd generation computer?

Explanation: The second-generation computer is based on the transistor whereas the third generation computer is based on the integrated chip. The second-generation computer is costly whereas the third-generation computer cost is less as compared to a second-generation computer.

What is sixth generation computer?

Sixth Generation of Computers:

These computers are called intelligent computers based on artificial intelligence or artificial brains. Whereas, it uses the semiconductors as the raw material to its processors.

How many transistors are used in third generation microprocessor?

The 386 contains 275,000 transistors in a VLSI (very large scale integration) circuit. The chip comes in a 132-pin package and draws approximately 400 milliamperes (ma), which is less power than even the 8086 requires.

What was the main feature of 3rd generation?

The main features of the third-generation computers were that they; used Integrated Circuits, reliable in comparison to previous two generations, smaller in size, generated less heat, faster in terms of speed, lesser maintenance, still costly, A.C needed, and consumed lesser electricity.

Which is better i3 3rd Gen or i5 2nd gen?

So for the desktop (where you can add a video card if you want serious gaming), the 2nd gen i5 would be much better than the 3rd gen i3. The desktop i5 is a quad core, the i3 is a dual core with hyperthreading. For laptops, the i5 is not that different from the i3. They are both dual cores with hyperthreading.

What is the difference between 2nd generation and 3rd generation i5 processor?

The main difference is the size of the transistors. Sandy bridge (or second gen) had a 32 nm transistor size. Ivy bridge (or third gen) has 22 nm. The main differences is the chipset they use, their GPUs, and their power consumption.

Who invented 5th generation computer?

The Fifth Generation Computer Systems (FGCS) was an initiative by Japan's Ministry of International Trade and Industry (MITI), begun in 1982, to create computers using massively parallel computing and logic programming. It was to be the result of a government/industry research project in Japan during the 1980s.

What is the third and fourth generation of computer?

Answer: The period of third generation was from 1965-1971 where Fourth Generation of computers was between 1971 – 1980. The computers of third generation used Integrated Circuits (ICs) whereas fourth generation computers used the VLSI technology or the Very Large Scale Integrated (VLSI) circuits technology.